最新的ICP Programs認證 API-SIEE考試題庫

問題1

What document provides information on design and installation of electrical systems for fixed and floating offshore petroleum facilities for unclassified and Class I, Zone 0, Zone 1 and Zone 2 locations?

A. IEEE 841

B. API RP 14F

C. NFPA 70

D. API RP 14FZ

正確答案: D

說明：（僅 VCESoft 成員可見）

問題2

A circuit breaker is defined as:

A. a means of energizing and de-energizing an electrical circuit.

B. a type of device used to provide voltage protection.

C. one or more enclosed vertical sections containing voltage.

D. a one-shot device that causes the current carrying element to melt open, disconnecting the load from the source voltage.

正確答案: A

說明：（僅 VCESoft 成員可見）

問題3

In hazardous classified locations on process skids, electrical and instrumentation equipment installed in the classified area must be:

A. supplied by the same manufacturer as the process equipment

B. mounted only outdoors

C. certified for the hazardous location

D. painted red

正確答案: C

問題4

What standard is used for the installation of signaling and communications conductors, equipment, and raceways?

A. NEMA 250

B. IEEE C37.20.2

C. NFPA 70

D. IEC 20047

正確答案: C

說明：（僅 VCESoft 成員可見）

問題5

What standard defines the maximum number of conductors permitted in outlets, devices and junction boxes, and conduit bodies?

A. NEMA 250

B. IEEE 112

C. IEC 60079 series

D. NFPA 70

正確答案: D

說明：（僅 VCESoft 成員可見）

問題6

Which switchgear-related item is explicitly identified in the guide table of contents as an inspection topic?

A. Metering

B. Firewater pump casing hardness

C. Cable tray color coding

D. Turbine nozzle alignment

正確答案: A

問題7

Which statement BEST describes the role of source inspection during manufacturing and fabrication?

A. It is limited to post-shipment activities

B. It verifies whether the supplier's quality system is functioning properly

C. It transfers all responsibility for product quality to the inspector

D. It replaces the supplier's quality system

正確答案: B

問題8

According to API RP 540, threaded conduit joints for explosionproof connections should be made with at least how many fully engaged threads?

A. 4

B. 5

C. 3

D. 2

正確答案: B

說明：（僅 VCESoft 成員可見）

問題9

According to NFPA 70, the number of bends permitted between pull points for rigid metal conduits RMC shall not be more than:

A. four bends provided the bend radii is at least 10 times the conduit diameter for conduit greater than 3/4 inch 19 mm.

B. four bends provided the radii is less than 5 times the conduit diameter.

C. the equivalent of six quarter bends.

D. the equivalent of four quarter bends 360 degrees total.

正確答案: D

說明：（僅 VCESoft 成員可見）

問題10

Areas where ignitable concentrations of flammable gases or vapors are present continuously or for long periods of time are classified as:

A. Class I Zone 2.

B. Class I Division 2.

C. Class I Zone 1.

D. Class I Zone 0.

正確答案: D

說明：（僅 VCESoft 成員可見）

最新的API Source Inspector Electrical Equipment - API-SIEE免費考試真題

最新更新

站內鏈接

聯系我們