下載最新試用版
979位客戶反饋
我們對我們的產品非常有信心，所以我們不提供会给客户带去麻煩的產品。
Huawei H12-831_V1.0 考試概覽:
| 認證廠商: | 華為 |
| 考試名稱: | HCIP-Datacom-Advanced Routing & Switching Technology V1.0 |
| 考試代碼: | H12-831_V1.0 |
| 及格分數: | 600/1000 |
| 實際考試題數: | 60 |
| 考試費用: | USD 180 |
| 考試形式: | 單選題, 多選題, 是非題, 簡答題, 拖放題 |
| 支援語言: | 中文, 英文, 日文 |
| 相關認證: | HCIP-Datacom-Core Technology V1.0 HCIE-Datacom |
| 證照有效期限: | 3年 |
| 考試時間: | 90 minutes |
| 推薦課程: | HCIP-Datacom-Advanced Routing & Switching訓練課程 |
| 考試報名: | 華為人才平台 Pearson VUE報名系統 |
| 範例考題: | Huawei H12-831_V1.0 範例考題 |
| 考試方式: | 透過Pearson VUE考試中心採線上或實體方式應考 |
| 必備條件: | 建議具備HCIA-Datacom認證或同等知識；強烈建議熟悉HCIP-Datacom-Core Technology相關知識 |
| 官方大綱網址: | https://e.huawei.com/en/talent/#/cert/exam-detail?code=H12-831_V1.0 |
Huawei H12-831_V1.0 考試大綱主題:
| 章節 | 權重 | 目標 |
|---|---|---|
| MPLS技術 | 19% | - MPLS基礎與標籤發送 - LDP與RSVP-TE協定 - MPLS VPN（L3VPN、L2VPN） - MPLS OAM與保護機制 |
| 進階乙太網路技術 | 10% | - QinQ與VLAN對應 - 乙太網路連結彙整與可靠性 - 連接埠隔離與安全功能 - VLAN彙整與MUX VLAN |
| 網路切換作業 | 7% | - 切換後驗證確認 - 執行流程與回滾策略 - 切換前驗證作業 - 切換規劃與風險評估 |
| 網路故障排除 | 10% | - 效能與服務故障解決 - 路由協定故障診斷 - 交換與連結故障處理 - 結構化故障排除方法 |
| 網路運維管理 | 7% | - 網路監控與效能分析 - 設定管理與備份 - 日誌與告警管理 - 例行維護作業流程 |
| 進階BGP功能 | 10% | - 路由策略與過濾 - BGP多宿主與負載平衡 - 路由反射器與聯邦 - BGP路由選徑與屬性 |
| IPv6路由 | 20% | - IPv6專用BGP4+協定 - IPv6位址規劃與設定 - IPv6專用OSPFv3與IS-IS協定 - 轉換機制（雙堆疊、通道、轉址） |
| 進階IGP功能 | 17% | - OSPF進階功能
|
最新的 HCIP-Datacom H12-831_V1.0 免費考試真題：
1. During an attempt to log in to a NetEngine AR6120 through the console port, the network engineer finds that the password is incorrect and the login fails. If a Telnet account can be used to log in to the device and the account has the permission to change the console port password, the network engineer can log in to the device through Telnet to change the console port password.
A) TRUE
B) FALSE
2. As shown in the figure, an administrator enables port isolation on the switch's interfaces connected to terminals.
In this scenario, which of the following IP addresses cannot be pinged from PC1?
A) 10.1.1.4
B) 10.1.1.1
C) 10.1.1.3
D) 10.1.1.5
3. On the OSPFv3 network shown in the figure, area 1 is a stub area, area 2 is a common area, and area 3 is an NSSA. Which of the following LSAs is displayed only in area 2?
A) Link-LSA
B) Router-LSA
C) Intra-Area-Prefix-LSA
D) AS-External-LSA
4. In the hub-spoke networking shown in the figure, which of the following commands must be configured on the Hub-PE to ensure correct route transmission?
A) [Hub-PE-bgp-VPN_in] peer x.x.x.x soo 200:1
B) [Hub-PE-bgp-VPN_out] peer x.x.x.x soo 200:1
C) [Hub-PE-bgp-VPN_out] peer x.x.x.x allow-as-loop
D) [Hub-PE-bgp-VPN_in] peer x.x.x.x allow-as-loop
5. On the network shown in the figure, IS-IS IPv6 runs on R2, R6, and R3, and the IPv6 address of Loopback0 on R6 is 2000::6/128. OSPFv3 runs on other links. Area 1 is a stub area, and area 2 is an NSSA. ISIS routes are imported to OSPFv3 on R2 and R3. Which of the following methods can enable R4 to ping 2000: :6?
A) Configure the attached-bit advertise always command in the IS-IS process of R2.
B) Configure the ipv6 default-route-advertise always level-1 command in the IS-IS process of R2.
C) Configure the attached-bit advertise always command in the IS-IS process of R3.
D) Configure the ipv6 default-route-advertise always level-1 command in the IS-IS process of R3.
問題與答案：
| 問題 #1 答案： A | 問題 #2 答案： A,C | 問題 #3 答案： D | 問題 #4 答案： A | 問題 #5 答案： A,B,C,D |
50.65.113.* -
太驚喜了，你們的考試練習題和答案真的很好，我就這樣輕松的通過了 H12-831_V1.0 考試，而且價格也非常合理！