最新的Network Appliance Certification認證 NS0-094考試題庫

問題1

A customer has one large aggregate over several shelves, and only one shelf has reached End of Support (EoS) and needs to be evacuated. The installation engineer already added a new shelf and assigned the disks with same type and size. Which NetApp ONTAP command is used to copy the data from disk to disk?

A. storage aggregate relocation

B. storage disk replace

C. storage disk fail -i

D. storage disk remove

正確答案: B

說明：（僅 VCESoft 成員可見）

問題2

A NetApp FAS50 HA pair contains a single NetApp DS212C shelf. A new single DS212C shelf of near-line SAS (NL-SAS) disks have been added to the same stack. The administrator tried to automatically assign the disks using the disk assign -auto true -node node-01 command. All the new disks continue to show in the cluster as unassigned. Which command is used to assign half of the new disks to node-01?

A. storage disk assign -node node-01 -all true

B. storage disk assign -owner node-01 -diskcount 6

C. storage disk option modify -autoassign-policy stack -node *

D. storage disk option modify -autoassign off -node node-01

正確答案: B

說明：（僅 VCESoft 成員可見）

問題3

You have a NetApp ONTAP cluster that is experiencing performance issues. The cluster shows the following messages in the EMS logs:

Which action do you take to resolve these messages?

A. Delete unneeded snapshots.

B. Replace the adapter in slot 2.

C. Replace the multiple bad drives.

D. Run wafliron on the data aggregates.

正確答案: D

說明：（僅 VCESoft 成員可見）

問題4

What should be the first step taken after detecting a NetApp WAFL inconsistency?

A. Stabilize the system.

B. Run wafliron.

C. Force offline the affected aggregate.

D. Run a dump to null.

正確答案: A

說明：（僅 VCESoft 成員可見）

問題5

You have been tasked with performing a nondisruptive controller upgrade on a 4-node cluster.
Which initial step is taken prior to the upgrade?

A. Reboot the entire cluster simultaneously.

B. Force a manual takeover of all HA partners at once.

C. Validate the cluster's health with NetApp Active IQ Config Advisor.

D. Unassign disk ownership from the controllers before shutting them down.

正確答案: C

說明：（僅 VCESoft 成員可見）

問題6

You need to upgrade your cluster switches to a new version of firmware. Which command do you use to prevent automatic case creation?

A. system node autosupport invoke -node * -type all -message MAINT=5h

B. system node autosupport invoke -node * -type all -message STOP=5h

C. system node autosupport invoke -node * -type all -message IGNORE=5h

D. system node autosupport invoke -node * -type all -message SUPPRESS=5h

正確答案: A

說明：（僅 VCESoft 成員可見）

問題7

After installing a new system at a customer's site, you notice that some disks show up as single- pathed.
The output of the nodeshell command sasadmin expander_map is as follows:

According to the output, which cable do you need to check and/or replace?

A. the cable between shelf ID 3, IOM A and shelf ID 4, IOM A

B. the cable between shelf ID 3, IOM A and controller port 0b

C. the cable between shelf ID 4, IOM A and shelf ID 4, IOM B

D. the cable between shelf ID 4, IOM A and controller port 0a

正確答案: A

說明：（僅 VCESoft 成員可見）

最新的Network Appliance NetApp Hardware Support Engineer Professional - NS0-094免費考試真題

最新更新

站內鏈接

聯系我們