最新的Autodesk Certified Professional認證 RVT_ELEC_01101考試題庫

問題1

An electrical designer needs to check for Interferences between conduit in the host model and beams in a linked structure model in the Interference Check dialog, select the items that the designer must select to perform the interference check. (Select two.)

正確答案:

問題2

Refer to exhibit.
(The image is presented in Imperial units: 1 In = 25 mm (Metric units rounded).)

In the space properties for the space, the Lighting Calculation Luminaire Plane is Not Computed. What is causing this issue?

A. The lights in this space are not circuited.

B. No lights are placed in the space.

C. Lights are at different elevations in the same space.

D. The lighting fixtures are missing an IES file.

正確答案: B

說明：（僅 VCESoft 成員可見）

問題3

Refer to exhibit.

Why is one receptacle shown in full color (black) and one receptacle shown in halftone (gray)?

A. The wire connecting the two receptacles is not property attached

B. The two receptacles are not on the some circuit.

C. The two receptacles have different load classifications.

D. The circuit's panelboard is not assigned.

正確答案: B

說明：（僅 VCESoft 成員可見）

問題4

A project has 24 branch panel schedules that all need the same formatting changes. What should the electrical designer do?

A. Use the Manage Templates command to edit and apply the template changes to all panel schedules.

B. Assign the desired view template to the panel schedules in the Properties panel.

C. Select all panel schedules in the Project Browser, right-click and choose Apply Template Properties, and select the desired template.

D. Edit a panel schedule, right-click and choose Duplicate View, and duplicate changes lo desired panel schedules.

正確答案: C

說明：（僅 VCESoft 成員可見）

問題5

An electrical designer needs to add a drafting view to a model from another project. What is the method to do this?

A. Select Open, select the desired project, right-click the desired drafting view, and then copy/paste

B. Select Transfer Project Standards, select the desired project, and then select the drafting view.

C. Select Insert from File, select Insert Views from File, browse to the desired project, and then select the drafting view.

D. Select Link Revit, browse to the desired model, and then select desired drafting view

正確答案: C

說明：（僅 VCESoft 成員可見）

問題6

Refer to exhibits.

An electrical designer models an existing receptacle on an existing wall that the architect has indicated to be demolished.

The view is intended to show demolition, and the view's Phase is set to New Construction. How should the designer indicate that the receptacle must also be demolished?

A. Set the receptacle parameter Phase Demolished to Demolition.

B. Set the receptacle parameter Phase Demolished to New Construction.

C. Add a Demolition phase, then set the receptacle parameter Phase Demolished to Demolition.

D. Set the receptacle's type parameter Match Phasing to Host.

正確答案: B

說明：（僅 VCESoft 成員可見）

問題7

Refer to exhibits.

What is the demand load on Panel B?

A. 30kVA

B. 55kVA

C. 40kVA

D. 65kVA

正確答案: B

說明：（僅 VCESoft 成員可見）

最新的Autodesk Certified Professional in Revit for Electrical Design - RVT_ELEC_01101免費考試真題

最新更新

站內鏈接

聯系我們