最新的Microsoft Networking with Windows Server 2016 - 070-741免費考試真題
問題1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Inernal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use Server1 as the default gateway.
Does this meet the goal?
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Inernal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use Server1 as the default gateway.
Does this meet the goal?
正確答案: B
說明：（僅 VCESoft 成員可見）
問題2
You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)
The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)
The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)
Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)
The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)
The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)
Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
正確答案:
Explanation:
Recursion is disabled so internet hosts cannot be resolved.
The recursive test fails because recursion is disabled.
Server1 is not configured as a root server. The forwarders list would be greyed out if it was.
問題3
You have the Hyper V hosts and the virtual machines shown in the following table.
The Hyper-V hosts and the virtual machines run Windows Server 2016 and are joined to the same Active Directory domain. You need to prepare the hosts and the virtual machines for a Software Defined Networking (SDN) deployment. The solution must meet the following requirements:
* Network Controller must be highly available.
* SDN must support the SON Software Load Balancer (SLB).
What should you do on the Hyper-V hosts and the virtual machines? To answer, select the appropriate options in the answer area.
The Hyper-V hosts and the virtual machines run Windows Server 2016 and are joined to the same Active Directory domain. You need to prepare the hosts and the virtual machines for a Software Defined Networking (SDN) deployment. The solution must meet the following requirements:
* Network Controller must be highly available.
* SDN must support the SON Software Load Balancer (SLB).
What should you do on the Hyper-V hosts and the virtual machines? To answer, select the appropriate options in the answer area.
正確答案:
問題4
You have a DHCP server named Server1 that runs Windows Server 2016.
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?
正確答案: C
問題5
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.
What should you do?
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.
What should you do?
正確答案: B
說明：（僅 VCESoft 成員可見）
問題6
You have a DNS server named Server1 that runs Windows Server 2016. Server 1 has a forward lookup scope for Contoso.com. The records in the zone are shown in the exhibit. (Click the Exhibit button.) Exhibit:
You run the following commands on Server1.
What are two results of the configuration? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
You run the following commands on Server1.
What are two results of the configuration? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
正確答案: A,B
說明：（僅 VCESoft 成員可見）
問題7
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
正確答案:
問題8
Your network contains an Active Directory forest named contoso.com. The forest contains the VPN servers configured as shown in the following table.
You are configuring a Network Policy Server (NPS) server named Server1. Server1 has the following RADIUS clients.
All three VPN servers are configured to use Server1 for RADIUS authentication. All of the users in comtoso.com are allowed to establish a VPN connection. For each of the following statements, select YES if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
You are configuring a Network Policy Server (NPS) server named Server1. Server1 has the following RADIUS clients.
All three VPN servers are configured to use Server1 for RADIUS authentication. All of the users in comtoso.com are allowed to establish a VPN connection. For each of the following statements, select YES if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正確答案:
Explanation:
References: https://docs.microsoft.com/en-us/windows-server/remote/remote-access/vpn/always-on-vpn/deploy/vpn-deploy-nps
問題9
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host.
You are deploying Software Defined Network (SDN) by using Windows Server 2016.
You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role.
You need to configure the virtual machine as the network controller.
What should you do?
You are deploying Software Defined Network (SDN) by using Windows Server 2016.
You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role.
You need to configure the virtual machine as the network controller.
What should you do?
正確答案: C
說明：（僅 VCESoft 成員可見）
問題10
You have a main office and three branch offices that connect by using a WAN link.
You have servers that run Windows Server 2016 and client computers that run Windows 10 Enterprise.
You plan to configure BranchCache so that clients in the branch office use a server on their local network to retrieve cached content from the servers in the main office.
You plan to use Active Directory for the client computers to locate the hosted cache servers.
You need to configure the client computers to automatically locate a hosted cache server from Active Directory.
Which two settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
You have servers that run Windows Server 2016 and client computers that run Windows 10 Enterprise.
You plan to configure BranchCache so that clients in the branch office use a server on their local network to retrieve cached content from the servers in the main office.
You plan to use Active Directory for the client computers to locate the hosted cache servers.
You need to configure the client computers to automatically locate a hosted cache server from Active Directory.
Which two settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
正確答案:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/networking/core-network-guide/cncg/bc-hcm/10-bc-client-by-scp
問題11
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server4, and Server5 that run Windows Server 2016.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit. (Click the Exhibit button.)
You configure the replication schedule for \\Contoso.com\Namespace1\Folder1 as shown in the Replication Schedule exhibit. (Click the Exhibit button.)
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphics.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit. (Click the Exhibit button.)
You configure the replication schedule for \\Contoso.com\Namespace1\Folder1 as shown in the Replication Schedule exhibit. (Click the Exhibit button.)
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphics.
正確答案:
Explanation:
The Replicated Folder (Folder1) refers to the name of the DFS target, not the name of the local folder. It does not matter if the local folder name does not match the name of the DFS target. Therefore, replication will work as normal according to the configured schedule.
問題12
You have a data center. The data center contains Hyper-V hosts that run Windows Server 2016.
You plan to host virtual machines for several customers. The virtual machines will run across any Hyper-V host. The network traffic of each customer will be isolated from the traffic of other customers.
You plan to use Software Defined Networking (SDN).
You need to recommend how to deploy Network Controller to support the planned deployment.
What should you include in the recommendation?
You plan to host virtual machines for several customers. The virtual machines will run across any Hyper-V host. The network traffic of each customer will be isolated from the traffic of other customers.
You plan to use Software Defined Networking (SDN).
You need to recommend how to deploy Network Controller to support the planned deployment.
What should you include in the recommendation?
正確答案: D
問題13
You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?
正確答案: A
