Avaya 3601 考試概覽:
| 認證廠商: | Avaya |
|---|---|
| 考試名稱: | Avaya Virtual Services Platform 9000 維護與故障排除考試 |
| 考試代碼: | 3601 |
| 實際考試題數: | 70-75 題(依考試版本而異) |
| 相關認證: | Avaya 認證支援專家(ACSS) |
| 支援語言: | English |
| 考試形式: | 選擇題(MCQ) |
| 範例考題: | Avaya 3601 範例考題 |
| 考試方式: | 通常為監考式考試,可於授權考試中心應考或採線上監考模式(依地區規定而異) |
| 必備條件: | 建議具備:基礎網路知識;擁有 Avaya ACIS 認證或同等相關經驗者尤佳(依考生發展路徑而異) |
Avaya 3601 考試大綱主題:
| 章節 | 目標 |
|---|---|
| 安裝與設定 | - 介面設定與 VLAN 配置 - 初始設定與部署 - 冗餘與高可用性設定 |
| 效能與最佳化 | - 流量監控與分析 - 交換網路架構之效能調校 |
| 故障排除 | - 網路連線與路由問題 - 硬體故障診斷 - 日誌分析與故障隔離 |
| 維護作業 | - 日常系統健康檢查 - 備份與還原程序 - 軟體升級與修補程式管理 |
| Avaya Virtual Services Platform 9000 架構 | - VSP 平台之交換與路由基礎知識 - 軟體架構與作業系統基礎知識 - VSP 9000 系統組件與硬體概覽 |
最新的 ACSS 3601 免費考試真題:
Buffer wrap is a variable of the Packet Capture Tool (PCAP) enable command, and by default it is set to true. Which statement describes what buffer-wrap does when it is set to true?
- A. Itenables external flash wrap around.
- B. It allows the capture to continue when the buffer becomes full.
- C. It wrapscaptured frames to the DRAM buffer.
- D. It stops packet rapture when the buffer becomes full.
答案:B 🗳️
Equal Cost MultiPath (FCMP) routes apply to Open Shortest Path First (OSPF), Routing Information Protocol (RIP), Border Gateway Protocol (BGP), Default and Static routes.
With ECMP, how many equal-cost paths can be configured to the same destination prefix?
- A. two
- B. up to eight
- C. up to six
- D. up to four
答案:B 🗳️
Which statement about configuring RADIUS authentication on the VSP 9000 is true?
- A. The UDP frame official port number must be configured to match the datarmetrics service.
- B. Configuration of Radius Authentication Is supported on secondary CP modules or HA.
- C. The VSP 9000 user the Global Vendor attributes.
- D. Enable RADIUS management to track the management sessions (ACLI only).
答案:D 🗳️
During a VSP 9000 boot up, the following log message appears: "Powering off card in slot 12 due to a low power condition."
Which statement describes how that card is brought back in service?
- A. Configure the existing power distribution to send enough power to that card.
- B. Add more power to the chassis.
- C. Re-direct power to that card from one of the spare SFmodules.
- D. Change the card's priority assignment for the power-down algorithm.
答案:D 🗳️
正在檢視第 1 頁(共 14 頁)。
正在檢視第 1-5 題(共 70 題)。

下載最新試用版
927位客戶反饋
我們對我們的產品非常有信心,所以我們不提供会给客户带去麻煩的產品。









61.62.247.* -
我購買了VCESoft網站的考試題庫,很開心,我的3601考試通過了,因為大多數考題和你們的題庫一樣。