最新的3COM 3M0-200 - 3M0-200免費考試真題

A. Define a Class of Service (CoS) and then assign the CoS to each user

B. Define a Type of Service (ToS) and then assign the ToS to each user

C. Define a User Configuration and then assign the Configuration to each user

D. Define a Type of Service (ToS), define a new group for the users and then assign the group to the new ToS

E. Define a Class of Service (CoS), define a new group for the users and then assign the group to the new CoS

A. To restore the configuration information choose: Operations/ Manage Data then select Browse to locate the configuration file and Click Restore

B. A Backup should be done after each major configuration change

C. Data included in a backup: configuration database, Auto Attendant prompts, user voice mail greetings, and optionally, all voice mail messages

D. To run a backup choose: System Configuration / Manage Data and click Backup Database button

E. By default, NBX voice mail messages are backed up

F. To restore an individual user's voice messages choose: Operations/ Manage Data input the users extension and click Restore Voice Mail Messages

G. By default, the backup is stored to the NBX hard disk

A. Each Pretranslation is used for either incoming or outgoing traffic

B. Outbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) supported by the Digital Line Card

C. Each Pretranslation is used for both incoming and outgoing traffic

D. Inbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) or Direct Inward Dial (DID) supported by the Digital Line Card

E. A single outbound or inbound Pretranslation definition contains all the required translations defined in order from lowest-to-highest extension

F. Pretranslation is not available on Analog Line Cards

A. NBX 2102 Business Phone

B. NBX 3102 Business Phone

C. NBX 2102PE Business Phone

D. NBX 1102 Business Phone

E. NBX 2102-IR Business Phone

A. Change to network protocol, for example, Standard IP or IP On-the-Fly

B. New software version

C. Change to NCP information, for example, IP address, default gateway

D. Change to Digital Line Card protocol, for example, Standard IP or IP On-the-Fly

E. Removing an interface card from an NBX chassis

F. Adding any new interface card to the NBX chassis, for example, Digital Line Card, Hub card, etc.