最新的Avaya Communication Server 1000 for Avaya Aura® Maintenance - 7004-1免費考試真題
問題1
To enabled and configured SIP on a Communication Server 1000 system, which software component on the IP Telephone Node must you enabled first using Element Manger?
正確答案: D
問題2
In order for Zone Based Dialing On-Net Call routing (Inter-site) to be used, users are required to dial an E.164 number (either International or National number), for calls between sites.
For this to be true, and for the system to pass the proper Calling Line ID (CLID), which prompt must be configured?
For this to be true, and for the system to pass the proper Calling Line ID (CLID), which prompt must be configured?
正確答案: D
問題3
Given the following network characteristics:
three Communication Server 1000 RIs. 7 x systems IP Peer Networking required DN uniqueness cannot be maintained route calls using site Location Codes (LOCs)
Which type of dialing plan is recommended for this call routing scenario?
three Communication Server 1000 RIs. 7 x systems IP Peer Networking required DN uniqueness cannot be maintained route calls using site Location Codes (LOCs)
Which type of dialing plan is recommended for this call routing scenario?
正確答案: C
問題4
Click the Exhibit button.
A customer requires that two of its employees be able to place toll calls to Australia, while all other employees are restricted to local dialing only. The customer's Communication Server 1000 is programmed with all required NCOS, FRL and Route List Index (RLI).
What is the most restrictive NCOS to assign to the two employees required to make toll call Australia given the tables, assuming that the call must complete over RLI 2 and the user must be able to use any RLI 2 entry to reach Australia?
A customer requires that two of its employees be able to place toll calls to Australia, while all other employees are restricted to local dialing only. The customer's Communication Server 1000 is programmed with all required NCOS, FRL and Route List Index (RLI).
What is the most restrictive NCOS to assign to the two employees required to make toll call Australia given the tables, assuming that the call must complete over RLI 2 and the user must be able to use any RLI 2 entry to reach Australia?
正確答案: B
問題5
You are using Element Manager to program a Route List Index (RLI).
Which Electronic Switched Network (ESN) parameters must you define to be able to successfully program an RLI?
Which Electronic Switched Network (ESN) parameters must you define to be able to successfully program an RLI?
正確答案: B
問題6
Click the Exhibit button.
A customer has a Communication Server 1000RIs. 7 x system. Telephone users are required to use Basic Alternate Route Selection (BARS) to make toll calls.
What Class of Service (CLS) adjustment must you make telephone in order to allow the system to use the telephone network class of service (NCOS) to determine call eligibility?
A customer has a Communication Server 1000RIs. 7 x system. Telephone users are required to use Basic Alternate Route Selection (BARS) to make toll calls.
What Class of Service (CLS) adjustment must you make telephone in order to allow the system to use the telephone network class of service (NCOS) to determine call eligibility?
正確答案: C
問題7
A customer has deployed a Communication Server (CS) 1000 RIs. 7 x system at their site. They have asked you if the CS 1000 has a feature that can extend and ring calls to other locations. You have decided that Personal Call Assistant (PCA) will meet the customer's requirements and verified that the system is equipped with Package 398, and that it has sufficient ISM parameters. Which step must be performed first when implementing PCA?
正確答案: D
