最新的Autodesk Certified Professional: AutoCAD for Drafting and Design - ACP-01101免費考試真題
問題1
Refer to exhibit.
正確答案: B
說明：（僅 VCESoft 成員可見）
問題2
You plan to draw a line at an angle of 6.25 degrees.
Where in the user interface do you configure polar tracking to work at this angle after selecting Polar Tracking On?
Note: Exhibit shown is the AutoCAD interface in Wind. Which the AutoCAD for the Mac version differs in appearance, the correct answers correlate in the options.
Where in the user interface do you configure polar tracking to work at this angle after selecting Polar Tracking On?
Note: Exhibit shown is the AutoCAD interface in Wind. Which the AutoCAD for the Mac version differs in appearance, the correct answers correlate in the options.
正確答案:
See the answer below:
Explanation:
polar tracking is a feature that allows you to draw lines at specific angles. You can configure polar tracking to work at any angle you want by following these steps:
* Click on the arrow next to the Polar Tracking icon in the Status bar and select Settings.
* In the Drafting Settings dialog box, click on the Polar Tracking tab.
* Under Additional Angles, click on New and enter 6.25 as the angle value. Click OK.
* Make sure that 6.25 is checked in the list of additional angles. Click OK.
Now you can draw a line at an angle of 6.25 degrees by using polar tracking.
Explanation:
polar tracking is a feature that allows you to draw lines at specific angles. You can configure polar tracking to work at any angle you want by following these steps:
* Click on the arrow next to the Polar Tracking icon in the Status bar and select Settings.
* In the Drafting Settings dialog box, click on the Polar Tracking tab.
* Under Additional Angles, click on New and enter 6.25 as the angle value. Click OK.
* Make sure that 6.25 is checked in the list of additional angles. Click OK.
Now you can draw a line at an angle of 6.25 degrees by using polar tracking.
問題3
A CAD designer receives a drawing file from an external consultant that contains a large number of Registered Applications Which method should the CAD designer use to remove excess Registered Applications from the drawing?
正確答案: D
說明：（僅 VCESoft 成員可見）
問題4
Drawings from different sources have been combined and resulted in duplicate background elements that are slightly offset from each other Some of the layer names match and other layers have an E prefix, indicating that they are existing.
To clean up the drawing, the Overkill (OVERKILL) command is used.
Which two settings will resolve the duplicate background and offsetting issues? (Select 2)
To clean up the drawing, the Overkill (OVERKILL) command is used.
Which two settings will resolve the duplicate background and offsetting issues? (Select 2)
正確答案: B,E
問題5
Exhibit.
The DATALINK and TABLE commands were used to create the COMPUTER SCHEDULE table.
The CAD designer selects the empty cells on the bottom tow to edit the cells to apply the TOTALS text.
Which method should be used to modify the table.
The DATALINK and TABLE commands were used to create the COMPUTER SCHEDULE table.
The CAD designer selects the empty cells on the bottom tow to edit the cells to apply the TOTALS text.
Which method should be used to modify the table.
正確答案: A
說明：（僅 VCESoft 成員可見）
問題6
Exhibit.
A CAD designer wants to stretch both extension lines of a linear dimension at equal distance using grips.
Alter selecting, the dimension, which workflow should the designer use? Note: Mac commands shown in parentheses. I
A CAD designer wants to stretch both extension lines of a linear dimension at equal distance using grips.
Alter selecting, the dimension, which workflow should the designer use? Note: Mac commands shown in parentheses. I
正確答案: D
說明：（僅 VCESoft 成員可見）
問題7
Refer to exhibit.
(Note Exhibit shown is the AutoCAD interface in Windows which the AutoCAD tor Mac version diners in appearance, the correct answers correlate in the options.] Tim four tree list sheets need to be plotted to PDF al half stale (12x18).
The sheet drawings shown have a page setup named 12x10 PDF predefined Willi those settings.
What should the CAD designer do 10 plot the requested sheets?
(Note Exhibit shown is the AutoCAD interface in Windows which the AutoCAD tor Mac version diners in appearance, the correct answers correlate in the options.] Tim four tree list sheets need to be plotted to PDF al half stale (12x18).
The sheet drawings shown have a page setup named 12x10 PDF predefined Willi those settings.
What should the CAD designer do 10 plot the requested sheets?
正確答案: B
說明：（僅 VCESoft 成員可見）
問題8
You have a drawing that contains three of the same objects.
Which object has layer transparency set to 90? Click the correct object in the answer area.
Which object has layer transparency set to 90? Click the correct object in the answer area.
正確答案:
Explanation:
According to the AutoCAD for Design and Drafting documents, layer transparency is a property that makes objects on a layer appear translucent or opaque. The higher the transparency value, the more transparent the layer appears. Therefore, the object that has layer transparency set to 90 is the one that appears the most faded or dimmed in the drawing. In this case, it is the object on the right. You can click on it to select your answer.
問題9
Refer to the exhibit.
A CAD designer modified an existing window schedule table into two sections by using table breaks.
Which combination of properties were used to modify the table to display as shown in the exhibit.
A CAD designer modified an existing window schedule table into two sections by using table breaks.
Which combination of properties were used to modify the table to display as shown in the exhibit.
正確答案: D
說明：（僅 VCESoft 成員可見）
問題10
You are modifying an AutoCAD drawing for a customer.
You would like to bring your customers attention to a specific area of the drawing that you modified for review.
Which type of object is conventionally used?
You would like to bring your customers attention to a specific area of the drawing that you modified for review.
Which type of object is conventionally used?
正確答案: A
說明：（僅 VCESoft 成員可見）
