H3C GB0-381-ENU 考試概覽:
| 認證廠商: | H3C |
| 考試名稱: | H3C 大型路由網路技術 V2.0 |
| 考試代碼: | GB0-381-ENU |
| 考試時間: | 60 minutes |
| 支援語言: | English |
| 相關認證: | H3CNE-Routing & Switching GB0-371 建置 H3C 高效能校園網路 V2.0 GB0-391 建置安全最佳化廣域網路 V2.0 |
| 考試形式: | 選擇題, 填充題 |
| 證照有效期限: | 3 年 |
| 考試費用: | 135 USD |
| 實際考試題數: | 50 |
| 及格分數: | 600 / 1000 |
| 推薦課程: | H3C 大型網路路由技術 V2.0 官方課程 |
| 考試報名: | Prometric 報名 H3C 認證入口網站 |
| 範例考題: | H3C GB0-381-ENU 範例考題 |
| 考試方式: | 線上遠端監考/透過 Prometric 於考場進行電腦測驗 |
| 必備條件: | 需持有有效之 H3CNE-Routing & Switching 認證 |
| 官方大綱網址: | https://www.h3c.com/en/Training_Certification/Technical_training___certification/Certification_Project/H3CSE/ |
H3C GB0-381-ENU 考試大綱主題:
| 章節 | 權重 | 目標 |
|---|---|---|
| 主題 1: IS-IS 協定 | 20% | - IS-IS 基礎概念與協定運作機制 - IS-IS 路由選擇與控制 - 適用於 IPv4 與 IPv6 的 IS-IS |
| 主題 2: OSPF 協定進階功能 | 25% | - OSPF 最佳化、過濾與故障排除 - 適用於 IPv6 的 OSPFv3 - OSPFv2 運作原理、鏈路狀態通告與區域類型 |
| 主題 3: IPv6 路由基礎 | 15% | - IPv6 靜態路由與動態路由基礎概念 - IPv6 定址結構與類型 |
| 主題 4: 大型網路路由概論 | 10% | - 大型路由網路的特性與需求 - 階層式與可擴充的路由設計模型 |
| 主題 5: 路由控制與策略 | 10% | - 不同協定間的路由重新發布 - 路由過濾、策略型路由(PBR) - 路由最佳化與故障排除 |
| 主題 6: BGP 協定 | 20% | - BGP 基礎概念、對等體與路徑屬性 - BGP 路由選擇、過濾與相關策略 - 適用於大型跨網域路由的 BGP |
最新的 H3CSE-Routing & Switching GB0-381-ENU 免費考試真題:
1. The routes learned through the OSPFv3 process belong to the _____ type of IPv6 routes.
A) Dynamic Routing
B) default route
C) static route
D) External routing
E) Direct route
2. After executing the displaospf lsdb command on the MSR router RTA, the router output is as follows:
Judging from the above output _______.
A) Tpe7 LSA does not exist in LSDB
B) There are two Tpe5 LSAs in the LSDB
C) This is an ASBR
D) This is an ABR
3. In the network as shown in the figure, dynamic routing protocols are not enabled between all routers, and only static routes can be configured.
Then the correct configuration on the RTE should be _________.
A) ip route-static 10.0.0.0 255.255.254.0 S1/0
B) ip route-static 10.0.0.0 255.255.254.0 S2/0
C) ip route-static 10.0.0.0 255.255.252.0 S2/0
D) ip route-static 10.0.0.0 255.255.252.0 S1/0
4. Which of the following actions cannot be performed by the appl clause in a PBR configuration?
A) Set message priority
B) Set the outgoing interface
C) Set the message length
D) set default next hop
E) Set the next hop of the packet
5. In the topology shown in the figure, the following configurations are performed on RTA and RTB respectively:
RTA-ospf-1-area-0.0.0.1]network 192.168.0.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.2.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.3.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.4.0 0.0.0.255 Now it is required that the RTC cannot learn the routes configured in the above RTA, what configuration can be performed on the router?
A) RTB-ospf-1-area-0.0.0.1]abr-summar192.168.0.0 255.255.252.0 not-advertise
B) RTB-ospf-1-area-0.0.0.0]abr-summar192.168.0.0 255.255.0.0 not-advertise
C) RTC-ospf-1-area-0.0.0.1]abr-summar192.168.0.0 255.255.224.0 not-advertise
D) RTB-ospf-1-area-0.0.0.1]abr-summar192.168.0.0 255.255.248.0 not-advertise
問題與答案:
| 問題 #1 答案: A | 問題 #2 答案: A,B | 問題 #3 答案: D | 問題 #4 答案: C | 問題 #5 答案: D |

下載最新試用版
1102位客戶反饋
我們對我們的產品非常有信心,所以我們不提供会给客户带去麻煩的產品。








1.172.108.* -
我將可以擁有一份很好的工作了,感謝 VCESoft 網站的幫助,讓我成功通過了 GB0-381-ENU 考試,并拿到了認證書。