最新的HP Aruba Data Center Network Specialist - HPE2-W09免費考試真題
問題1
Is this part of the process for using NetEdit to update firmware on ArubaOS-CX switches?
Solution: Upload firmware images to the NetEdit firmware repository.
Solution: Upload firmware images to the NetEdit firmware repository.
正確答案: A
說明：（僅 VCESoft 成員可見）
問題2
Is this part of the process for using NetEdit to update firmware on ArubaOS-CX switches?
Solution: Create a conformance test to check that the firmware matches the desired version.
Solution: Create a conformance test to check that the firmware matches the desired version.
正確答案: A
說明：（僅 VCESoft 成員可見）
問題3
Does this correctly describe how the Virtual Switching Extension (VSX) fabric reacts to various component failure scenarios?
Solution: The ISL and keepalive goes down, and after a few seconds, the keepalive link restores.
Switch-l and Switch-2 remains up. The Split-recovery mode is enabled. In this case the secondary switch shutdowns SVls when keepalive is restored.
Solution: The ISL and keepalive goes down, and after a few seconds, the keepalive link restores.
Switch-l and Switch-2 remains up. The Split-recovery mode is enabled. In this case the secondary switch shutdowns SVls when keepalive is restored.
正確答案: A
說明：（僅 VCESoft 成員可見）
問題4
Is this a best practice when positioning ArubaOS-CX switches in data center networks?
Solution: Deploy Aruba CX 6300 switches as data center spine switches.
Solution: Deploy Aruba CX 6300 switches as data center spine switches.
正確答案: B
說明：（僅 VCESoft 成員可見）
問題5
Refer to the exhibit. You are adding a VLAN 30, subnet 10.0.30.0/24 to the network shown in the exhibit. (This network is simplified to just the relevant switches for this item.) This subnet belongs in VRF A, and you have added a Layer 3 VLAN 30 interface attached to this VRF on Switch-1.
You want to make the services in this VLAN available to devices in 10.1.20.0/24 in VRF B.
Is this part of a valid setup for meeting these requirements?
Solution: Add VRF B as the secondary VRF on VLAN interface 30.
You want to make the services in this VLAN available to devices in 10.1.20.0/24 in VRF B.
Is this part of a valid setup for meeting these requirements?
Solution: Add VRF B as the secondary VRF on VLAN interface 30.
正確答案: B
說明：（僅 VCESoft 成員可見）
問題6
Refer to the exhibit. Switch-1 and Switch-2 ate ArubaOS-CX switches that implement VXLAN WITHOUT Ethernet VPN (EVPN). Switch-2 uses the same VNI-to-VLAN mappings as Switch-1.
Is this how the specified servers communicate?
Solution: The first time that Server I communicates with Server 3, It sends an ARP request to resolve Server 3's MAC address.
Is this how the specified servers communicate?
Solution: The first time that Server I communicates with Server 3, It sends an ARP request to resolve Server 3's MAC address.
正確答案: B
說明：（僅 VCESoft 成員可見）
問題7
You ate using NetEdit to manage AruDaOS-CX switches. You want to deploy a standard conflg to the switches, but need the config to include a few device-specific settings such as hostname and IP address.
Is this what you should do?
Solution: Instead of using a standard configuration plan to deploy the configuration, create an auto config plan that uses scripts.
Is this what you should do?
Solution: Instead of using a standard configuration plan to deploy the configuration, create an auto config plan that uses scripts.
正確答案: A
說明：（僅 VCESoft 成員可見）
問題8
Is this a use case for deploying Ethernet Ring Protection Switching (ERPS)?
Solution: connecting multiple data centers at Layer 2 while minimizing the number of dark fiber connections required
Solution: connecting multiple data centers at Layer 2 while minimizing the number of dark fiber connections required
正確答案: A
說明：（僅 VCESoft 成員可見）
問題9
Does this correctly describe the ArubaOS-CX architecture?
Solution: The AtubaOS-CX software is based on the ArubaOS-Switch software and adds data center features.
Solution: The AtubaOS-CX software is based on the ArubaOS-Switch software and adds data center features.
正確答案: B
說明：（僅 VCESoft 成員可見）
