最新的AMPP-SICT認證 Senior-Internal-Corrosion-Technologist考試題庫

問題1

The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cute of

A. urethanes.

B. epoxies.

C. inorganic zincs.

D. powder coatings.

正確答案: C

問題2

You are a NACE Level 2 in-house inspector working in a shop. Your In-house UP requires you to perform a sleeve test to test for soluble sails; however the 3rd party NACE Level 3 inspector, representing the owner, has used a salt smart meter and has achieved a very different result and has rejected the pre cleaning.
Your FIRST preferred course of action is to:

A. Review the specification with the other inspector to see what method was specified

B. Advise the other Inspector he is using an Incorrect method

C. Advise your QC Manager to change the UP to the use of the salt smart meter

D. Redo the pre-cleaning based on the other Inspectors results

正確答案: A

問題3

Ideally, documentation requirements should be defined:

A. By the contractor

B. In the specification

C. By the inspector

D. At the pre-job conference

正確答案: B

問題4

Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:

A. Conductive coatings applied to a cementitious substrate

B. Conductive coatings applied to a magnetic metallic substrate

C. Magnetic coatings applied to a magnetic metallic substrate

D. Non-Conductive coatings applied to a conductive metallic substrate

正確答案: A

問題5

Individuals conducting Coating Surveys should:

A. Always be NACE or 5SPC Protective Coating Specialists

B. Always be trained and experienced Coating Industry

C. Always be NACE Level 3 Certified Inspectors

D. Always be experienced Specification Writers

正確答案: C

問題6

NACE No. 13/ SSPC 6 Identifies the use of:

A. Steam cleaning only

B. Watterjetting only

C. Abrasive blasting only

D. Various methods of cleaning

正確答案: D

問題7

Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide If and when a destructive test is required.

A. False

B. True

正確答案: A

問題8

Which product Is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?

A. 2-Layer Polyethylene (PE)

B. Concrete

C. 3-Layer Polyethylene (PE)

D. Coal Tar Enamel

正確答案: D

問題9

Inspection and Test Plans are provided to:

A. So the contractor has a single document to reference

B. Outline the Inspection steps, sequencing and pass/fail criteria

C. So the Inspector doesn't have to read the entire specification

D. To supersede the requirements of the product data sheets

正確答案: B

最新的AMPP Internal Corrosion for Pipelines - Level 2 - Senior-Internal-Corrosion-Technologist免費考試真題

最新更新

站內鏈接

聯系我們