CTTAM Civil-Engineering-Technology 考試概覽:

認證廠商:	CTTAM（曼尼托巴省認證技術員與技師協會）
考試名稱:	技術考試－土木工程技術 C.E.T
考試代碼:	Civil-Engineering-Technology
證照有效期限:	終身有效（須持續更新會員資格）
相關認證:	Certified Engineering Technologist (C.E.T) Certified Technician (C.Tech) Applied Science Technologist (A.Sc.T)
考試形式:	筆試, 論述題, 解題作答
考試費用:	CAD 250
考試時間:	180 minutes
及格分數:	60%
支援語言:	English
範例考題:	CTTAM Civil-Engineering-Technology 範例考題
考試方式:	筆試（實地應考）
必備條件:	報考者須為CTTAM會員（或同時申請入會），並已取得認可之土木工程技術相關學位，或具備同等資歷之工作經驗。
官方大綱網址:	https://cttam.com

CTTAM Civil-Engineering-Technology 考試大綱主題:

章節	權重	目標
材料試驗	20%	- 土壤力學與試驗 1. 土壤分類與性質 2. 夯實與承載力試驗 - 混凝土與瀝青試驗 1. 現場與實驗室試驗流程 2. 配比設計與品質管控
運輸工程	20%	- 交通工程 1. 號誌設計與交通管制 2. 交通流量與容量分析 - 公路與道路設計 1. 幾何設計原理 2. 路面設計與材料
測量學	20%	- 測量與計算技術 1. 測量數據之計算與平差 2. 現場測量作業流程 - 測量儀器與方法 1. GPS與現代測量技術 2. 全站儀與水準儀操作
市政工程	20%	- 供水與配水系統 1. 給水系統設計與水力學 2. 水質與處理基礎 - 污水與雨水管理 1. 排水與防洪控制 2. 衛生下水道與雨水下水道設計
結構設計基礎	20%	- 結構構件設計 1. 鋼構與木構設計基礎 2. 鋼筋混凝土設計 - 結構分析 1. 樑、柱與構架之分析 2. 載重判定與傳遞路徑

最新的 CTTAM C-E-T Civil-Engineering-Technology 免費考試真題：

1. Who is responsible for establishing and maintaining a system that is compliant with the Occupational Health and Safety Act in a workplace?

A) Prime contractor
B) General contractor
C) Sub-contractor
D) Prime consultant

2. Whatto determine the compressive strength of concrete?

A) Air test
B) Slump test
C) Sieve test
D) Cylinder test

3. A gas fireplace has been installed by the general contractor's sub-trade. After numerous repair attempts, it is still not operating properly. How should the owner correct the problem?

A) Ask the general contractor to review and correct the installation.
B) Ask the sub-trade to review and correct the entire installation.
C) Contact the fireplace manufacturer for assistance.
D) Engage a new mechanical contractor for repairs and back-charge the general contractor.

4. A civil engineering technologist needs to recommend a foundation design for a commercial building. The borehole logs identify unsuitable bearing soils beneath the proposed floor elevation to a depth of 4 m and shallow bedrock at 5 m. Which of the following types of design should the technologist recommend?

A) Slab on grade
B) End-bearing piles
C) Friction piles
D) Strip footing

5. What does a system curve illustrate?

A) The minimum radius at which a car can safely travel at 50 km/h
B) The total head loss in a system of pipes as related to total flow
C) The total fl as related to time
D) The total length of the water mains as related to the water main diameter

問題與答案：

問題 #1
答案： A

問題 #2
答案： D

問題 #3
答案： A

問題 #4
答案： B

問題 #5
答案： B